Rollformed Prepainted Aluminium
Design

        Protect houses from outside atmosphere, including heat from the sun, rain, and noise. Mainly installed outside of the houses instead of curved steel. The product is also capable to use in cold storages that needed to control temperature.

Security Material

        Each shutter line is produced from two layers of aluminum with compression of polyurethane (more than 300Kg/m 3) between the layers. Polyurethane is well known as heat insulator that is light, endurable, and flame retardant. Therefore the product has capability to delay or prevent robberies and control temperature.

Adventages of Polyurethane
  • Oil and solvent resistant
    Polyurethane has excellent resistance to oils, solvents, fats, greases and gasoline.
  • Load bearing capacity
    Polyurethane has a higher load-bearing capacity than any conventional rubber. Because of this characteristic, it is an ideal material for load wheels, heavy duty couplings, metal-forming pads, shock pads, expansion joints and machine mounts.
  • Weather resistant
    Polyurethane has outstanding resistance to oxygen, ozone, sunlight and general weather conditions.
  • Excellent noise abatement properties
    The hard urethanes are now being used as gears in products where engineers desire sound reduction. The soft urethanes are used to replace rubbers for improved sound/vibration dampening.
  • Flex-Life
    Most formulations offer extremely high flex-life and can be expected to outlast other elastomer materials where this feature is an important requirement. Dust boots, bellows, diaphragms, belts, couplings and similar products are made from urethane for this reason.
  • Heat and cold resistant
    Continuous use above 225°F is not recommended nor is urethane recommended in hot water over 175°F. At low temperatures, polyurethane will remain flexible down to -90°F. A gradual stiffening will occur at 0°F, but will not become pronounced until much lower temperatures are obtained.
Color & Specification

  • RA45W

    Rollformed Prepainted aluminium width 45mm. White Flat Polyurethane high density (blue).

  • RA45N

    >Rollformed Prepainted aluminium width 45mm. Walnuts Flat Polyurethane high density (blue).

  • RA45G

    Rollformed Prepainted aluminium width 45mm. Grey Flat Polyurethane high density (blue).

  • RA77W

    Rollformed Prepainted aluminium width 77mm. White Curve Polyurethane high density (blue).

  • RA77O

    Rollformed Prepainted aluminium width 77mm. Golden Oak Curve Polyurethane high density (blue).

  • RA77G

    Rollformed Prepainted aluminium width 77mm. Pearl Grey Curve Polyurethane high density (blue).

  • RA77B

    Rollformed Prepainted aluminium width 77mm. Beige Curve Polyurethane high density (blue).

Special Feature

        Each shutter line is produced from aluminum that contains specialty of heat insulator (polyurethane). Therefore, shutter doors and windows that made from this material will be able to control temperature.

Photos & Videos